■ 설정정보확인
1. <FEED> + <PAUSE> 버튼 함께누르면서 POWER ON
2. <FEED> 버튼을 눌러서 항목이동
3. <PAUSE> 클릭하여 세부항목확인
<7> IP ADDRESS -> IP -> GW -> SUBNET MASK -> PORT
(1) Format of Interface command
● The length from [ESC] to [LF] [NUL] must be as specified by each command.
● There are the following three kinds of control codes:
① ESC (1BH), LF (0AH), NUL (00H)
② { (7BH), | (7CH), } (7DH)
③ Code set in the system mode
(2) 프린트 통신 테스트
[Examples]
{T00C31|}
_T________ : Feeds the paper.
__0_______ : No sensor
___0______ : Non-cut
____C_____ : Batch mode (Cut and feed when “1 (Cut)” is selected for parameter b.)
_____3____ : B-SX4T: 3: 3 ips, 6: 6 ips, A: 10 ips , B-SX5T: 3: 3 ips, 5: 5 ips, 8: 8 ips
______1___ : With ribbon (with ribbon saving function)